>> P.488
PILLOBALLLubrication Type PILLOBALL Rod EndsInsert Type/With Male Threadd21dr1hBC1Gr1d2l1lPOS(…A)Identification numberMass (Ref.)Boundary dimensionsmmgdThreadGd2C1Bd1l2h(1)r1s inl1POS 35.0 3M 3×0.5124.5POS 48.1 4M 4×0.7145.3POS 5A12.5 5M 5×0.8166POS 6A19 6M 6×1186.7567895.23327150.26.53730170.27.74133200.294536220.2POS 8A32 8M 8×1.2522912 10.45342250.2POS 10A5410M10×1.526 10.514 12.96148290.2POS 12A8512M12×1.7530 1216 15.46954330.2POS 14A12614M14×234 13.519 16.97760360.2POS 16A18516M16×238 1521 19.48566400.2POS 18A26018M18×1.542 16.523 21.99372440.2POS 2034020M20×1.546 1825 24.410178470.2POS 2243522M22×1.550 2028 25.810984510.2POS 2565025M24×260 2231 29.612494570.6POS 2887528M27×266 2535 32.3136103620.6POS 301 07030M30×270 253734.8145110660.6Dynamic load capacityStatic load capacityCdNCsN1 7501 2202 4802 0603 2703 3404 2004 7307 0108 6409 81013 30013 10016 90016 80020 90021 00025 40025 70030 20030 80035 50037 40041 70046 20072 70058 40087 00062 30092 200Ball dia.mm(inch) 7.938( 516) 9.525( 3╱8)11.112( 716)12.700( 1╱2)15.875( 5╱8)19.050( 3╱4)22.225( 7╱8)25.400(1 )28.575(1 1╱8)31.750(1 1╱4)34.925(1 3╱8)38.100(1 1╱2)42.862(111╱16)47.625(1 7╱8)50.800(2 )Note(1) Minimum allowable value of chamfer dimension r1 Remarks1. Neither oil hole nor grease nipple is provided for POS with an inner ring bore diameter d of 4 mm or less. or those with an inner ring bore diameter d of 5 to 6 mm, an oil hole is provided on the body. For others, a grease nipple is provided on the body.2. No grease is prepacked. Perform proper lubrication.3. When a metric ne thread specication for inner ring bore deameter d of 8 mm to 14 mm is required, please contact IKO.K39
| < 
| 
> | 
>>
