>> P.356
CCB3g2Gg1G1d1C1R=500BB2B1G1B2d1C1B1R=500BDHGDHStud dia. 3-20mmCF … WBRStud dia. d13-10mmCF … WBRStud dia. d112-20mmCAM FOLLOWERSThrust Disk Type Cam FollowersWith Cage/Stud Head Hex HoleIdentification numberStud dia.Shield typeSealed typeMass (Ref.)(2)gBoundary dimensionsmmDCd1Gmm 3 4 5 6 81012161820G156CF 3 WBRCF 3 WBUUR 4.310 7 3M 3×0.5CF 4 WBRCF 4 WBUUR 7.412 8 4M 4×0.7CF 5 WBRCF 5 WBUUR10.313 9 5M 5×0.87.5CF 6 WBRCF 6 WBUUR 18.51611CF 8 WBRCF 8 WBUUR 28.5CF 10 WBRCF 10 WBUUR 45CF 10-1 WBRCF 10-1 WBUUR 60CF 12 WBRCF 12 WBUUR 95CF 12-1 WBRCF 12-1 WBUUR10519222630321112121414 6 810101212M 6×1 8M 8×1.25 10M10×1.25 12M10×1.25 12M12×1.5 13M12×1.5 13CF 16 WBRCF 16 WBUUR170351816M16×1.5 17CF 18 WBRCF 18 WBUUR250CF 20 WBRCF 20 WBUUR460CF 20-1 WBRCF 20-1 WBUUR3854052472024241820M18×1.5 19M20×1.5 2120M20×1.5 21Note(1) For other dimensions, refer to the CF…WBR drawing.(2) This is the value for the product body only. The values for the accessories shown in Table 13 on page 14 are not included.Remarks1. odels with a stud diameter d1 of 4 mm or less have no oil hole. For Models with a stud dia. 5 to 10 mm, oil hole (re-greasing tting) is provided at the head. Other models are provided with an oil hole (grease nipple) at the head and an oil hole each on the outside surface and end surface of the stud.2. hield type models with a stud diameter d1 of 10 mm or less and the sealed type models are provided with prepacked grease. Other models are not provided with prepacked grease. Perform proper lubrication for use.I43
| < 
| 
> | 
>>
