>> P.354
(Eccentricity)εGG1d1C1B1B2CBDHR=500CAM FOLLOWERSSolid Eccentric Stud Type Cam FollowersWith Cage/Stud Head Hex HoleStud dia. 6-18mmCFES … BRStud dia. d16-10mmIdentification numberStud dia.mm6810121618Shield typeSealed typeWith crowned outer ringWith cylindrical outer ringWith crowned outer ringWith cylindrical outer ringCFES 6 BRCFES 6 BCFES 6 BUURCFES 6 BUUCFES 8 BRCFES 8 BCFES 8 BUURCFES 8 BUUCFES 10 BRCFES 10-1 BRCFES 10 BCFES 10-1 BCFES 10 BUURCFES 10-1 BUURCFES 10 BUUCFES 10-1 BUUCFES 12 BRCFES 12-1 BRCFES 12 BCFES 12-1 BCFES 12 BUURCFES 12-1 BUURCFES 12 BUUCFES 12-1 BUUCFES 16 BRCFES 16 BCFES 16 BUURCFES 16 BUUCFES 18 BRCFES 18 BCFES 18 BUURCFES 18 BUUMass (Ref.)(2)g18.528.5456095105170250DC16192226303235401111121214141820d1 6 8101012121618Note(1) (2) (3) Remarks1. 2. For dimensions other than the chamfer dimension (r) and the shape of the outside surface of the outer ring outside surface, refer to the CFES…BR drawing.This is the value for the product body only. The values for the accessories shown in Table 13 on page 14 are not included.Minimum allowable value of chamfer dimension rModels with a stud diameter d1 of 10 mm or less have an oil hole (re-greasing tting) at the head. Other models are provided with an oil hole (grease nipple) at the head and an oil hole each on the outside surface and end surface of the stud.Shield type models with a stud diameter d1 of 10 mm or less and the sealed type models are provided with prepacked grease. Other models are not provided with prepacked grease. Perform proper lubrication for use.I41
| < 
| 
> | 
>>
