>> P.334
â– Mounting1the C-Lube Unit perpendicularly to the center together with Cam Set axis of Cam Follower and Follower by tightening nut. (See Fig. 10.)fix Fig. 10 Mounting of C-Lube Unit2Position of C-Lube Unit is adjustable. C-Lube Unit must be positioned avoiding loading direction. (See Fig. 11.)â– Precaution for use1Do not wash with organic solvent and/or white kerosene, which have the ability of removing fat nor leave them in contact with the above agents.2Do not apply a load onto the C-Lube Unit directly.3To ensure normal rotation of the Cam Follower, apply a load of 1% or over of the dynamic load rating at use.Also, the outer ring needs to be rotate over a revolution to supply lubricant on entire outer diameter surface.4The maximum allowable load on IKO Cam Follower with C-Lube Unit is, 80% of the maximum allowable load of the needle bearing.C-Lube Unit may be damaged and influenced to the smooth rotation and lubricating performance by excessive load.5After assembling C-Lube Unit and Cam Followers in the machine, please confirm that C-Lube unit provides oil correctly to the cam guide surface before actual operation.Fig. 11 Load direction of Cam FollwerLoad6Do not use in the environment which contamination of liquid and/or harmful foreign matter are expected.3tightening When the nut, should not be exceeded tightening torque on dimension table. In case vibration, using special washer are recommended.loosening of the nut is predicted due to lock nut, spring washer and other tightening the torque the value maximum 7Replace with new C-Lube Unit when inside oil nishes completely. Re-lubrication is not possible.I21
| < 
| 
> | 
>>
