>> P.325
CFCFKRCFCCFSNUCFCRI■Oil HoleThe position of oil hole is shown in Table 11.Perform greasing quietly by tting a lubrication nozzle indicated in Table 12 to a straight type grease gun in JIS B 9808 and pressing the grease nipple or re-greasing tting.Due to their structures, lubrication is not possible for Standard Type Cam Followers CF…B (size 3 and 4), C-Lube Cam Followers, Cam Followers G, or Miniature CFS Series.the nozzle against Table 11 Position of oil holeSeriesSize of stud diameter d1 (1) mm Standard Type Cam FollowerEccentric Type Cam FollowersSolid Eccentric Stud Type Cam FollowersThrust Disk Type Cam FollowersStandard Type Cam FollowerEccentric Type Cam FollowersCF…BCFE…BCFES…BCF…WBCFKRCFKRECentralized Lubrication Type Cam FollowersCF-RU1, CF-FU1(4)Easy Mounting Type Cam FollowersCam Follower GCF-SFU…BCF…GC-Lube Cam FollowersCF…WB…/SGShort Stud Type Cam FollowersMiniature Type Cam FollowersCFC…BCFSCFS…WCylindrical Roller Cam FollowersNUCF…BCR…BInch series Cam FollowersCRCRH…BWith hexagon holeWith screwdriver slotWith hexagon holeOil hole positiond1 <55≦d1 ≦1010<d1 d1 ≦1010<d1 d1 ≦1212<d1 d1 ≦1010<d1 d1 ≦1010<d1 d1 ≦6.35 6.35<d1 d1 ≦6.35 6.35<d1 d1 ≦7.9387.938<d1①Head-〇(3)〇(2)〇(2)〇(2)〇〇〇(3)〇(5)--〇(6)-〇(3)〇(2)--〇〇--〇:Oil hole is prepared.②Stud outside surface③Stud end②①③--〇-〇-〇-------〇-〇-〇-〇--〇〇〇-〇-------〇-〇-〇-〇Notes(1) n case of Eccentric Type Cam Followers, thread diameter G shown in the table of dimensions is applicable in place of stud dia. and the oil hole on the outer surface of the stud cannot be used. (2) Grease nipple is incorporated in the hexagon hole. Re-greasing can be made from the stud head and the stud end by press tting a supplied grease nipple into the stud end. See page Ⅰ4. (3)Re-lubrication can be made from the re-greasing tting that is inserted into the hexagon hole. See page Ⅰ4. (4)Tapped holes for oil connectors are provided at the stud end and hole of the head. (5)Re-greasing can be made from the grease nipple in the hexagon hole. (6) or the stud diameter d1 = 5 to 6 mm, grease can be fed from the re-greasing tting located inside the hexagon hole on the head only.I12
| < 
| 
> | 
>>
